Process; (4.1) Gamma Correction On/Off; (4.2) Detail (Outline) Gain Setting; (4.3) Dnr (Digital Noise Reduction) - Toshiba IK-CT1C Instruction Manual

4 PROCESS

Move up and down
by pushing
MENU UP,DOWN
-- 4 PROCESS --
GAMMA ON/OFF ON
DTL GAIN
DNR
PEDESTAL
4 1 Gamma correction ON/OFF
Move the " " to GAMMA ON/OFF by pushing [MENU UP], [MENU DOWN] buttons.
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
4 2 Detail (outline) gain setting
Move the " " to DTL GAIN by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the detail gain by pushing [DATA UP], [DATA DOWN] buttons.
The detail decreases.
4 3 DNR (Digital Noise Reduction) setting
Move the " " to DNR by pushing [MENU UP], [MENU DOWN] buttons.
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
Note:
When DNR is set to ON, noise is reduced, but a ghost image may be seen when shooting moving
objects.
4 4 Pedestal setting
Move the " " to PEDESTAL by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the pedestal by pushing [DATA UP], [DATA DOWN] buttons.
PEDESTAL decreases
Select the desired
value by pushing
DATA UP,DOWN
5
ON
0
DATA UP
OFF 5
DATA DOWN
DATA UP
10 0
DATA DOWN
Gamma correction ON, OFF
Detail gain setting OFF, 1 to 10
Digital noise reduction ON,OFF
Pedestal setting -10 to 10
The detail increases.
10
PEDESTAL rises
10
26