Table of Contents
Advertisement
( 4 ) PROCESS
• Gamma Correction (GAMMA)
Select either OFF or ON of Gamma Correction.
• Master Pedestal (M. PED)
Set the Pedestal level of each RGB.
• R Pedestal (R. PED)
Set the Pedestal level of Red.
• B Pedestal (B. PED)
Set the Pedestal level of Blue.
• Shading Correction (SHAD.)
Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom
of the screen. In this case, the shading correction can decrease the color shading. For the shading correction
of the unit, MANU (Manual shading correction) and OFF (no shading correction) modes are provided.
1 MANU (Manual Shading)
Adjust the correction amount on the PROCESS menu by confirming with a monitor or a waveform monitor.
2 OFF
The status is no shading correction.
* The shading correction is effective when the lens iris or zoom ratio is fixed. Use the unit with
SHAD. OFF for variable lens conditions.
Move up down
By pushing
MENU UP, DOWN
-- PROCESS --
GAMMA
M.PED
R.PED
B.PED
SHAD.
MANU
(4. 1) Changing gamma correction
1 Set the " " to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
2 Set the gamma correction by pushing [DATA UP], [DATA DOWN] buttons.
(4. 2) Changing master pedestal
1 Set the " " to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
2 Set the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4. 3) Changing R pedestal
1 Set the " " to R. PED by pushing [MENU UP], [MENU DOWN] buttons.
2 Set the R pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4. 4) Changing B pedestal
1 Set the " " to B. PED by pushing [MENU UP], [MENU DOWN] buttons.
2 Set the B pedestal by pushing [DATA UP], [DATA DOWN] buttons.
Set by pushing
DATA UP, DOWN
OFF
0
0
0
MANU
0
• Gamma correction ON/OFF
• Master pedestal adjustment -64 to 64
• R pedestal adjustment -64 to 64
• B pedestal adjustment -64 to 64
• Shading mode setting MANU/OFF
• Manual shading adjustment -128 to 127
21
Advertisement
Table of Contents
