Table of Contents
Advertisement
The available picture area is shown by the shading correction on the screen that is divided into
64 parts.
PRESET A
PRESET E
(e) Confirming the contents of the zone area selected by AWB
Set the " " to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
Area screen appears by pushing [DATA UP], [DATA DOWN] buttons.
When AREA is set to USER, the setting can be changed on the area menu. When changing the area,
refer to the item "7.2 (8) Setting USER area".
Push the [DISP] button to return to the menu.
3 2 Changing the setting in ATW(Automatic Tracking White balance) mode
Move up and down
by pushing
MENU UP,DOWN
-- 3 WHT BAL -- <FILE A>
MODE
R PAINT
B PAINT
(a) Changing R PAINT
Move the " " to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
Red is decreased.
PRESET B
Custom
Selection
USER
Select the desired
value by pushing
DATA UP,DOWN
ATW
0
0
DATA UP
Red is increased.
10
0
DATA DOWN
PRESET C
White balance mode AWB, ATW, MANUAL
R PAINT adjustment -10 to 10
B PAINT adjustment -10 to 10
10
23
PRESET D
Advertisement
Table of Contents
