Send To Computer - Sony ILCE-7 How To Use Manual

Touch the smartphone to the product for 1-2 seconds until "PlayMemories Mobile"
launches.
To transfer two or more images, select MENU →
Smartphone] to select images. After the connection enabled screen appears, use NFC
to connect the product and the smartphone.
About "NFC"
NFC is a technology that enables short-range wireless communication between various
devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with
just a touch on the designated touch-point.
Note
You can select an image size to be sent to the smartphone from [Original], [2M], or [VGA].
To change the image size, refer to the following steps.
For Android smartphone
Start "PlayMemories Mobile," and change the image size by [Settings] → [Copy Image Size].
For iPhone/iPad
Select "PlayMemories Mobile" in the setting menu, and change the image size by [Copy Image Size].
RAW images are converted to JPEG format when they are sent.
If the Image Index is displayed on the product, you cannot transfer images using the NFC
function.
If you cannot make a connection, perform the following:
Launch "PlayMemories Mobile" on your smartphone, and then move the smartphone slowly toward
the (N mark) of this product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Confirm that the NFC function is activated on the smartphone.
When [Airplane Mode] is set to [On], you cannot connect the product and the smartphone.
Set [Airplane Mode] to [Off].
You cannot send AVCHD format movies.
[201] Using Wi-Fi functions > Transferring images to a
computer

Send to Computer

You can transfer images stored in the product to a computer connected to a wireless access
point or wireless broadband router and easily make backup copies using this operation. Before
starting this operation, install "PlayMemories Home" on your computer and register the access
(Wireless) → [Send to