Multi Frame Nr - Sony ILCE-7 How To Use Manual

sensitivity
ISO
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger
the number, the higher the sensitivity.
1. MENU →
Menu item details

Multi Frame NR:

Combines continuous shots to create an image with less noise.
ISO AUTO (default setting):
Sets the ISO sensitivity automatically.
50 / 64 / 80 / 100 / 125 / 160 / 200 / 250 / 320 / 400 / 500 / 640 / 800 / 1000 /
1250 / 1600 / 2000 / 2500 / 3200 / 4000 / 5000 / 6400 / 8000 / 10000 / 12800 /
16000 / 20000 / 25600:
You can reduce image blurring in dark locations or with moving subjects by increasing the ISO
sensitivity (select a larger number).
Note
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
[Sweep Panorama]
When [ISO] is set to a value lower than ISO 100, the range for recordable subject brightness
(dynamic range) may decrease.
The higher the ISO value, the more noise will appear on the images.
When shooting movies, ISO values between ISO 200 and ISO 25600 are available.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting.
Select [ISO AUTO] and press the right side of the control wheel, and set the desired values
for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum]
and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi
Frame NR].
[90] Using shooting functions > Selecting the ISO
(Camera Settings) → [ISO] → desired setting.