Send To Computer - Sony ILCE-6500 Manual

Before you touch the smartphone, cancel the sleep and lock-screen functions of the
smartphone.
The NFC function is available only when the
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches.
To transfer two or more images, select MENU →
Smartphone] to select images. After the connection enabled screen appears, use NFC
to connect the product and the smartphone.
About "NFC"
NFC is a technology that enables short-range wireless communication between various
devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with
just a touch on the designated touch-point.
NFC (Near Field Communication) is an international standard of short-range wireless
communication technology.
Note
You can select an image size to be sent to the smartphone from [Original], [2M] or [VGA].
To change the image size, refer to the following steps.
Start PlayMemories Mobile, and change the image size by [Settings] → [Copy Image Size].
RAW images are converted to JPEG format when they are sent.
If the Image Index is displayed on the product, you cannot transfer images using the NFC function.
If you cannot make a connection, do as the following:
Launch PlayMemories Mobile on your smartphone, and then move the smartphone slowly toward
the (N mark) of this product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Check whether the NFC function is activated on your smartphone.
When [Airplane Mode] is set to [On], you cannot connect the product and the smartphone. Set
[Airplane Mode] to [Off].
You cannot send AVCHD format movies.
You cannot send XAVC S format movies.
[239] Using wireless functions

Send to Computer

Transferring images to a computer
(N mark) is displayed on the product.
(Wireless) → [Send to