You Cannot Find The Wireless Access Point To Be Connected; Wps Push] Does Not Work; Send To Computer] Is Canceled Halfway - Sony ILCE-7 How To Use Manual

[274] Troubleshooting > Viewing images
A DPOF mark cannot be put.
You cannot place DPOF marks on RAW images.
[275] Troubleshooting > Wi-Fi

You cannot find the wireless access point to be connected.

Wireless access points may not be displayed on the product due to signal conditions. Place
the product closer to the wireless access point.
Wireless access points may not be displayed on the product depending on the access point
settings. Refer to the instruction manual of the wireless access point.
[276] Troubleshooting > Wi-Fi

[WPS Push] does not work.

[WPS Push] may not work depending on the access point settings. Check the SSID and
password of the wireless access point, and perform [Access Point Set.].
[277] Troubleshooting > Wi-Fi

[Send to Computer] is canceled halfway.

When the battery remaining level is low, [Send to Computer] may be canceled halfway.
Charge the battery pack and try again.