Measuring The Exact Distance To The - Sony ILCE-7 How To Use Manual

[67] Using shooting functions > Adjusting the focus
Measuring the exact distance to the subject
The mark shows the location of the image sensor*. When you measure the exact distance
between the product and the subject, refer to the position of the horizontal line.
The distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).
*
The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the attached lens, the focus
cannot be confirmed. Make sure you put enough distance between the subject and the
product.
[68] Using shooting functions > Adjusting the exposure
Exposure Comp.
You can adjust the exposure under MENU when the exposure compensation dial is set to "0."
Based on the exposure value set by auto exposure, you can make the entire image brighter or
darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure
compensation). Normally, exposure is set automatically (auto exposure).
1. MENU →
You can adjust the exposure in a range of –5.0EV to +5.0EV when the exposure
compensation dial is set to "0."
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
(Camera Settings) → [Exposure Comp.] → desired setting.