Sony ILCE-7 How To Use Manual page 217

process lasts just as long as the shutter remains open. You cannot do any further shooting
during this reduction process.
Unable to display.
Images recorded with other products or images modified with a computer may not be
displayed.
Cannot recognize lens. Attach it properly.
The lens is not attached properly, or the lens is not attached. If the message appears when a
lens is attached, reattach the lens. If the message appears frequently, check whether the
contacts of the lens and product are clean or not.
When attaching the product to an astronomical telescope or something similar, set [Release
w/o Lens] to [Enable].
The SteadyShot function does not work. You can continue to shoot but the SteadyShot
function will not work. Turn the product off and on again. If this icon does not disappear,
consult your Sony dealer or local authorized Sony service facility.
The retractable lens with power zoom is retracted. Turn off the product and eject the battery
pack, then reinsert the battery pack.
Unable to print.
You tried to mark RAW images with a DPOF mark.
Internal temp. high. Allow it to cool.
The product has become hot because you have been shooting continuously. Turn the power
off. Cool the product and wait until the product is ready to shoot again.
You have been recording images for a long time, the product temperature has risen. Stop
recording images until the product cools.
Recording is unavailable in this movie format.
Set [ File Format] to [MP4].
The number of images exceeds that for which date management in a database file by the
product is possible.
Unable to register to the database file. Import all the images to a computer and recover the
memory card.
Image DataBase File error
There is something wrong in the Image Database File. Select [Setup] → [Recover Image