Picture Effect - Sony ILCE-7 How To Use Manual

1. MENU →
2. Hold the camera/camcorder so that the white area fully covers the AF area located in the
center, and then press
The calibrated values (Color Temperature and Color Filter) are displayed.
3. Select a registration number using the right/left side of the control wheel.
The monitor returns to the recording information display while retaining the memorized
custom white balance setting.
Note
The message [Custom WB Error] indicates that the value is higher than the expected range,
when the flash is used on a subject with too bright colors in the frame. If you register this
value, the
this point, but it is recommended that you set the white balance again to get a more accurate
white balance value.
[95] Using shooting functions > Selecting an effect mode

Picture Effect

Select the desired effect filter to achieve more impressive and artistic images.
1. MENU →
Menu item details
Off (default setting):
Disables the [Picture Effect] function.
Toy Camera:
Creates the look of a Toy Camera photo with shaded corners and pronounced colors.
Pop Color:
Creates a vivid look by emphasizing color tones.
Posterization:
Creates a high contrast, abstract look by heavily emphasizing primary colors, or in black and
white.
Retro Photo:
Creates the look of an aged photo with sepia color tones and faded contrast.
(Camera Settings) → [White Balance] → [Custom Setup].
on the center of the control wheel.
indicator turns yellow on the recording information display. You can shoot at
(Camera Settings) → [Picture Effect] → desired setting.