Multi Frame - Sony ILCE-7 How To Use Manual

reduction is in progress.
You cannot set the shutter speed to [BULB] in the following situations:
When the [Smile Shutter] function is activated.
When the [Auto HDR] function is activated.
When [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.].
When the [Multi Frame NR] function is activated.
When the [Drive Mode] function is set to [Cont. Shooting], [Spd Priority Cont.] or [Self-timer(Cont)].
If you use the above functions when the shutter speed is set to [BULB], the shutter speed is
temporarily set to 30 seconds.
Hint
Images shot in [BULB] mode tend to blur. We recommend that you use a tripod or a multi-
terminal-compatible remote commander that has a shutter button lock function (sold
separately).
[28] Shooting > Selecting a shooting mode
Memory recall
Allows you to shoot an image after recalling often-used modes or camera settings registered in
advance.
1. Set the mode dial to 1 or 2 (Memory recall).
2. Press on the center of the control wheel.
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings are
given priority and the original settings may become invalid. Check the indicators on the
screen before shooting.
[29] Shooting > Selecting a shooting mode
Movie
You can adjust the shutter speed or aperture value to your desired settings for recording