Sony ILCE-7 How To Use Manual page 165

When the desired access point is displayed on the screen: Select the
desired access point.
When the desired access point is not displayed on the screen: Select
[Manual Setting] and set the access point.
*
For the input method, refer to
If you select [Manual Setting], input the SSID name of the access point, then select the
security system.
3. Input the password, and select [OK].
Access points without the
4. Select [OK].
How to use the keyboard
When manual character entry is required, a keyboard is displayed on the screen.
1. Input box The characters you entered are displayed.
2. Switch character types Each time you press
the character type switches among alphabet letters, numerals and symbols.
3. Keyboard Each time you press
"How to use the keyboard."
mark do not require a password.
on the center, the character that you enter will be
on the center of the control wheel,