Installation Options; Individual Unit; Side By Side; Individual Appliances With Partition - Thermador T36IT70NNP/04 Installation Instructions Manual

Installation options
There are many different installation options.
These are limited only by the design of the kitchen and
the function of the finger guard.
Individual unit
Side-by-Side
* Partition required!
[_ When 2 appliances are installed Side-by Side,
the Basic Combination Side-by-Side Sealing kit
"BSEALKIT10" must be used to ensure a stable
connection.
See the section on "Optional accessories" on
page 11.
Individual appliances with partition
,
,
,
,
Note
When dimensioning the partition for model 4, note
the thickness of the furniture fronts to prevent
damage if the doors are opened at the same time.
Use the Extreme Combination Side-by-Side
Heating kit "XHEATKIT10"
a) If the gap between the appliances is tess than
6" (160 mm),
See the section on "Optional accessories" on
page 11.
Minimum thickness of the partition 5/s" (16 mm).
At the end of the kitchen units
If one side of the appliance is visible, a side panel must
be used.
The side panel must be connected firmly to the watt,
the floor and overhead furniture/fixtures before the
appliance is placed in the cavity.
The dimensions of the side panel are taken from the
opposite cavity watt. During installation ensure that the
cavity is square and the exact size.
5