ELECTRIC
DRYER
ELECTRICAL
CONNECTIONS
Connection
Options
Power Cord
4-wire receptacle (NEMA Type 14-30R)
Direct Wire
4-wire direct
(127
3-wire receptacle (NEMA Type 10-30R)
3-wire direct
Connecting
4-Wire
Connection:
Power
Supply
Cord
IMPORTANT: A 4-wire connection
is required for mobile
homes and where local codes do not permit the use of 3-wire
connections.
Standard
Power Supply Cord Connectors
Connecting
Direct Wire Ground
Flanged spade connector
Ring Connector
Connecting
Ground and Neutral Wires
1. Remove center terminal block screw and the ground wire by
removing the external ground connector screw.
2. Connect ground and neutral wire to center terminal block.
24
3. Connect ground wire (green or bare) with external ground
connector screw.
Connecting
Remaining Wires
4. Connect remaining wires with outer terminal block screws.