Electronic Control Setup - Whirlpool CET8000AQ1 Installation Instructions Manual

ELECTRONIC CONTROL SETUP INSTRUCTIONS
OPTIONS 3.XX = 9.XX TO USE iF SPECIAL PRiCiNG
IS SELECTED
Code Explanation
3.07 SPECIAL CYCLE PRICE (WASHER)
3.07
Represents the number of quarters (coin 1) to start
the washer; may adjust from 0-39. (See VALUE OF
COiN 1.)
• Advance from 0-39 by pressing the lower-left
(HOT) button. Factory default of 7 quarters =
$1.75
Press the lower-middle (WARM) button once to
advance to next code.
3.06 SPECIAL CYCLE PRICE (DRYER)
3.06 Represents the number of quarters (coin 1)
to start the dryer; may adjust from 0-39.
(See VALUE OF COiN 1).
Advance from 0-39 by pressing the upper-left
(COTTON/WHITES) button. Factory default of
6 quarters = $1.50.
Press the lower-middle (WARM) button once
to advance to next code.
4.05 SPECIAL DRY TIME (DRYER)
4.05
Represents the number of minutes per quarter
(coin 1).
Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the upper-left (COTTON/WHITES)
button, the value can be adjusted from 1-99
minutes.
Press the lower-middle (WARM) button once
to advance to next code.
5.00 TIME-OF-DAY CLOCK, MINUTES
5.00
This is the TIME-OF-DAY CLOCK, minute
setting; select 0-59 minutes by pressing the
lower-left (HOT) button.
Press the lower-middle (WARM) button once to
advance to next code.
6.00 TIME-OF=DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0-23 hours by pressing the lower-left (HOT)
button.
Press the lower-middle (WARM) button once
to advance to next code.
7.00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7.00 This is the start hour; 0-23 hours.
Select START HOUR by pressing the lower-left
(HOT) button.
Press the lower-middle (WARM) button once
to advance to next code.
8.00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8.00 This is the stop hour; 0-23 hours.
Select STOP HOUR by pressing the lower-left
(HOT) button.
Press the lower-middle (WARM) button once
to advance to next code.
36
Code Explanation
9.10 SPECIAL PRICE DAY
9.10
This represents the day of the week and whether
special pricing is selected for that day. A number
followed by "0" indicates no selection that
particular day (9.10). A number followed by an "S"
indicates selected for that day (9.1S). To change
the value of "0" and "S," use the lower-right
(COLD) button. Days of the week (1-7) are selected
by pressing the lower-left (HOT) button.
When exiting set-up code "9," the display must show the
current day of week:
A. 00
A. 00
A. SC
b. 05
b. 05
C. 20
C. 20
E. 00
E. 00
E. AC
DISPLAY DAY OF WEEK CODE (selected)
10 Day 1=Sunday 1S
20 Day 2=Monday 2S
30 Day 3=Tuesday 3S
40 Day 4=Wednesday 4S
50 Day 5=Thursday 5S
60 Day 6=Friday 6S
70 Day 7=Saturday 7S
Press the lower-middle (WARM) button once to
advance to next code.
VAULT VIEWING OPTION
This option is either NOT SELECTED "00"
or SELECTED "SC."
Not Selected "00."
Selected "SC."
Press the lower-right (COLD) button once for
this selection. When selected, the money and/or
cycle counts will be viewable (if counter option(s)
is selected) when the coin box is removed.
Press the lower-middle (WARM) button once
to advance to next code.
VALUE OF COIN 1
This represents the value of coin 1 in number of
nickels: 05 = $0.25.
By pressing the lower-left (HOT) button, there is
an option of 1-199 nickels.
Press the lower-middle (WARM) button once
to advance to next code.
VALUE OF COIN ?=/VALUE OF DRYER
TOP OFF
This represents the value of coin 2 in number
of nickels: 20 = $1.00.
Press the lower-middle (WARM) button once
to advance to next code.
ADD COINS OPTION
This option is either NOT SELECTED "00" or
SELECTED "AC." This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
Not Selected "00."
Selected "AC."
• Press the lower-right (COLD) button
3 consecutive times for this selection.
• Press the lower-middle (WARM) button once
to advance to next code.