Summary of Contents for BLADEZ POWERTRAINER PT-388
Page 1
POWERTRAINER PT-388 OWNER’S MANUAL BLADEZ Corporation 20155 Ellipse Foothill Ranch, CA 92610 Phone: 949-206-8152 Fax: 949-206-0013 Email: f itness@ebladez.com Revision date 5/24/06...
Page 2
INTRODUCTION ongratulations for selecting POWERTRAINER PT-388HRP as your primary source of fitness. BLADEZ treadmills offer many exercise programs that benefit users of all levels and ages. The treadmill is designed to make your workouts more effective and enjoyable. Please read this manual carefully before using your PT-388HRP POWERTRAINER.
SECTION 1 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using the treadmill. Notice: Consult your family physician or health care professional to develop a well planned exercise program to fit your health needs. If you encounter any pain or breathing discomfort while working out, STOP!, and consult a physician before continuing.
Page 5
IMPORTANT SAFETY INSTRUCTIONS CONTINUED GROUNDING INSTRUCTIONS This product must be grounded. If it malfunctions or breaks down, grounding provides a path of least resistance for electric currents, to reduce the risk of electric shock. This product is equipped with a cord which has an equipment-grounding conductor and a grounding plug.
SECTION 2 ASSEMBLY INSTRUCTIONS ASSEMBLY CHECK LIST ITEM Description Computer Console Frame Left Upright Right Upright Left Handrail Right Handrail Left Handrail Cover Right Handrail Cover Bottle Holder Bottle Cork Bracket...
Page 8
ASSEMBLY INSTRUCTIONS CONTINUED A minimum of two people are required to assemble this treadmill. Also, read and understand all instructions thoroughly before assembling the treadmill. 1. Tie the attached black guide wire to the wire connector and feed the wire slowly through the bottom left upright (D) opening and pull the connector from the top.
Page 9
ASSEMBLY INSTRUCTIONS CONTINUED 4. Insert the Bracket (L) between the uprights and secure them with four screws (d). 5. Rest the console with handrails onto the uprights and attach cable from the console to the cable that comes from the right upright.
Page 10
ASSEMBLY INSTRUCTIONS CONTINUED 6. Attach the press fit screw covers left (G) and right (H) into place and secure with two screws (a). 7. Insert the cork (K) into the bottom of the uprights. 8. Screw the water bottle holder (I) onto the console.
SAFETY KEY & CLIP Your Bladez treadmill is equipped with a safety key that will disable the treadmill if it is not in place. You should attach the clip end to your clothing. The magnet end goes into the recess of the console.
Page 12
GETTING STARTED CONTINUED PROGRAM SET-UP 9 HOLE AND 5K RUN PROGRAMS 1. Turn on POWER. 2. Press the 9 HOLE or 5K RUN key ~ Display window will show LBS. 3. Adjust your weight with the keys. 4. Press ENTER ~ Display window will show Level (L1-L10). 5.
Page 13
GETTING STARTED CONTINUED HEART RATE PROTECTION PROGRAM CONTINUED 5. Adjust your age using the keys. 6. Press ENTER ~ Display will show BPM (Beats per Minute). 7. Adjust your maximum safe heart rate with the keys. Note: The computer sets your low-end target heart rate by calculating 65% of your maximum heart rate.
Page 14
GETTING STARTED CONTINUED USING BODY FAT 1. Turn on POWER. 2. Press BODY FAT ~ Age will be flashing. 3. Adjust your age with the keys. 4. Press ENTER ~ Gender will be flashing 5. Adjust your gender with the keys.
Page 15
GETTING STARTED CONTINUED HANDRAIL CONTROLS – The right handrail controls the speed of the treadmill and can be adjusted at any time during your workout. The left handrail controls the elevation of the treadmill and can be adjusted at any time during your workout.
SECTION 5 PREVENTIVE MAINTENANCE If the Running Belt is not centered on the Tail roller, and is either too far to the left or right, adjust tracking using the following steps: 1. Turn Treadmill on, and increase speed to 3.0 mph.
Page 30
TROUBLESHOOTING CONTINUED ERROR MESSAGE PROBABLE CAUSES SOLUTION - Safety Key Off Safety Key Faulty Check Safety Key or Switch - Elevation Motor Elevation Motor not moving Check Elevation Motor connection - Stalled Elevation Elevation Motor screw binding Clean screw and lubricate Elevation Motor out of Range Check Zero Position of E-Motor...
LABOR –2 Years Bladez Fitness shall cover the labor cost for the repair of the device for a period of two years from the date of original purchase, so long as the device remains in the possession of the original owner.
Need help?
Do you have a question about the POWERTRAINER PT-388 and is the answer not in the manual?
Questions and answers