BEC 7300 Series User Manual page 89

(802.11g) adsl2+ router
Table of Contents

Advertisement

from this IP address are sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication, and define access rights from the identified
IP address. Once authentication has succeeded, users from this IP address are able to view
and modify data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community
string paradigm for "security" but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism with fine granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
 From RFC 1213 (MIB-II):
 From RFC1650 (EtherLike-MIB):
 From RFC 1493 (Bridge MIB):
System group
Interfaces group
Address Translation group
IP group
ICMP group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group
dot3Stats
dot1dBase group
dot1dTp group
87

Advertisement

Table of Contents
loading

Table of Contents