Set Location – Lets you set th
the department. This is used for location‐based chan
selection.
Delete Department – Lets you d
Editing Channels
Select Edit Channel from the Department menu.
Create a new channel.
Name the Channel.
Select a Service Type for the Channel.
e geographic boundaries for
nel
elete the department.
Set the Talk Group ID for the Channel.
Note: To enter the I‐Call Wildcard, enter i0 as the Talk
Group ID.
You will now see the Channel menu.
Edit Name – Allows you to rename the channel.
Edit Talk Group ID – Allows you to change the channel's
Talk Group ID.
Delay: 2 sec – Lets you set the channel delay (the amount
of time the HomePatrol‐1 stays
transmission ends before continuing sc
2, 5, 10, or 30 seconds – HomePatrol‐1 waits the
specified amount of time.
0 Seconds – HomePatrol‐1 resumes scanning as
soon as a transmission ends.
‐10, ‐5 seconds – Forces scan resume after the
set duration, even if the transmission continues.
Set Alert – Lets you set an alert
whenever the channel becomes active.
on
a frequency after a
anning.
tone
that will sound
40 | P a g e