Editing Unit Ids - Uniden HomePatrol?1 Owner's Manual

Select NEXT, then enter the range for the depar
(the distance from the center of the circle to an edge).
ACCEPT the range to store the setting.
If you select Rectangles, tap Create New Location to add
a rectangle, or an existing rectangle to edit it.
Enter the latitude and longitude for one corner of the
rectangle.
Next, enter the latitude and longitude for an opposing
corner of the rectangle.
When you accept the setting, you are returned to the
location selection screen with the new settings added.
tment
Repeat this to define rectangles for the department.
The HomePatrol‐1 will use eithe the Circle or Rectangles,
depending on which one you last select
Editing Unit IDs
Unit IDs identify the specific radio currently transmitting
on the channel. You can program Unit IDs into the
HomePatrol‐1 so that it will display user information
during scanning. You will also need to turn on the Unit ID
Display option (MENUDisplay Options).
From the System menu, select Edit Unit IDs.
Select Create a New Unit ID.
Assign an alpha tag to the ID, then tap Next.
r
ed.
34 | P a g e