Creating A Department - Uniden HomePatrol?1 Owner's Manual

If you select Circle, tap the existing coordinates.
Then, use the form to enter the latitude and longitude of
the circle's center.
Note, the format used to enter the location is set by the
button in the lower right corner of the screen. In this
example, we show coordinates using DMS format.
Select NEXT, then enter the range for the department
(the distance from the center of the circle to an edge).
ACCEPT the range to store the setting.
If you select Rectangles, tap Create New Location to add
a rectangle, or an existing rectangle to edit it.
Enter the latitude and longitude for one corner of the
rectangle.
Next, enter the latitude and longitude for an opposing
corner of the rectangle.
When you accept the setting, you are returned to the
location selection screen with the new settings added.
Repeat this to define rectangles for the site.
The HomePatrol‐1 will use either the Circle or Rectangles,
depending on which one you last selected.
Creating a Department
From the system menu, select Edit Department.
14 | P a g e