Edit Frequency – Lets you add or change the frequencies
used by the site.
Modulation – toggles the modulation used for the site.
Attenuator: Off – Allows you to attenuate signals when
receiving the site, if set to On.
Set Location – Lets you enter the site's geographic
location.
Delete Site – Allows you to delete the site from the
database.
Editing the Band Plan
To set the band plan, select Edit Band Plan from the Site
menu.
You will see the Select Band Plan menu.
Select to use the 800/900 Standard band plan, the 800
Splinter band plan, or a custom band plan. If you select
Custom, you will see the following menu.
Select the table entry to edit.
Enter the lower frequency for the table entry. Then click
next.
Enter the upper frequency for the table entry. Then click
next.
Select the frequency spacing for the band plan entry.
Input the offset for the band plan entry. Then tap Accept.
Repeat this for additional table entries.
29 | P a g e