You will then see the site menu.
Edit Name – Lets you change the Site's name.
Edit Frequency – Lets you add or change the frequency
used by the site.
Attenuator: Off – Allows you to attenuate signals when
receiving the site, if set to On.
Set Location – Lets you enter the site's geographic
location.
Delete Site – Allows you to delete the site from the
database.
Entering the Site Frequencies
To enter frequencies for the site, select Edit Frequency
from the Site menu.
Then, select Create New Frequency.
Enter the frequency and tap Accept.
The Frequency menu appears.
Edit Frequency – allows you to change the frequency.
Delete Frequency – deletes the frequency from the site.
New Frequency – tap to add additional frequencies, then
repeat the above steps.
Setting a Site's Location
You can define a site's location using either a single circle
(defined by the centerpoint's latitude and longitude and
the distance from the center, or range) or by using
rectangles (each rectangle defined by the latitude and
longitude of opposing corners).
At the Site Menu, select Set Location.
21 | P a g e