Honda 2009 CBR1000RR Owner's Manual page 148

Compression Damping
RIGHT SIDE
(1)
(2)
(3)
(1) damping adjuster
(2) punch mark
(3) reference punch mark
To adjust to the standard position:
1. Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
2.
3.
1
Turn the adjuster counterclockwise
approximately 2 turns (
or 2 1/4 turns ( CBR1000RR ABS
so that the punch mark ( ) on the
adjuster aligns with the reference punch
mark ( ). This is the standard position. 3
Make sure that both fork legs are
adjusted to the same position.
To Reduce Compression Damping
(SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT (S).
To Increase Compression Damping
(HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD (H).
Servicing Your Honda
Suspension
CBR1000RR )
)
2
139