If A Fuse Blows - Honda 2009 CBR1000RR Owner's Manual

All of the electrical circuits on your
motorcycle have fuses to protect them
from damage caused by excess current
flow (short circuit or overload).
If something electrical on your motorcycle
stops working, the first thing you should
check for is a blown fuse.
Determine from the chart on the circuit
fuse box cover which fuse or fuses control
that component. Check those fuses first,
but check all the fuses before looking
elsewhere for another possible cause of
the problem. Replace any blown fuses and
check component operation.

If a Fuse Blows

The main fuse and the FI fuse are
located on the starter motor magnetic
switch ( ) under the front seat. 3
The circuit fuse box is located under the
front seat.
The spare fuses are located in the fuse
box.
Recommended Fuses
main fuse
FI fuse
other fuses
ABS motor fuses
(CBR1000RR ABS)
1. To prevent an accidental short circuit,
turn the ignition switch OFF before
checking or replacing the fuses.
2. Remove the front seat (page
Taking Care of the Unexpected
30A
20A
10A, 20A
30A
109 ).
213