Preparation - Honda 2009 CBR1000RR Owner's Manual

Starting & Stopping the Engine

Preparation

Before starting, insert the key, turn the
ignition switch ON, and confirm the
following:
The transmission is in neutral (neutral
indicator is ON).
The engine stop switch is set to RUN.
The warning indicator is ON.
The low oil pressure indicator is ON.
The PGM-FI malfunction indicator
lamp (MIL) is OFF.
The high coolant temperature indicator
is OFF.
The HESD indicator is OFF.
The Combined ABS indicator is ON.
(CBR1000RR ABS only)
68
Basic Operation & Riding
The warning indicator and low oil pressure
indicator should go off a few seconds
after the engine starts. If the warning
indicator and the low oil pressure indicator
light, stop the engine immediately and
check the engine oil level.
(CBR1000RR ABS only)
The Combined ABS indicator should go
off after you ride the motorcycle at a
speed above 6 mph (10 km/h).