Braeburn Premier 5300 User Manual page 5
Premier series universal auto changeover thermostat up to 2 heat / 2 cool conventional and heat pump
Hide thumbs
Also See for Premier 5300:
- Installation manual ,
- User manual (15 pages) ,
- Installer's manual (10 pages)
Advertisement
2
PROGRAMMING
USER SETTINGS
2.5 Setting Your Energy Saving Programs
cont.
4 Event
Time: 6:00 am
Time: 6:00 am
Heat: 70˚ F (21˚ C)
Heat: 70˚ F (21˚ C)
Cool: 75˚ F (24˚ C)
Cool: 75˚ F (24˚ C)
Time: 8:00 am
Time: 8:00 am
Heat: 62˚ F (17˚ C)
Heat: 70˚ F (21˚ C)
Cool: 83˚ F (28˚ C)
Cool: 75˚ F (24˚ C)
Time: 6:00 pm
Time: 6:00 pm
Heat: 70˚ F (21˚ C)
Heat: 70˚ F (21˚ C)
Cool: 75˚ F (24˚ C)
Cool: 75˚ F (24˚ C)
Time: 10:00 pm
Time: 10:00 pm
Heat: 62˚ F (17˚ C)
Heat: 62˚ F (17˚ C)
Cool: 78˚ F (26˚ C)
Cool: 78˚ F (26˚ C)
NOTE:
If the 5-2 day programming mode was selected during the Installer Setup (Installer Guide section 4.2),
the default program will use the weekday and weekend times and temperatures shown above.
cont.
8
2
PROGRAMMING
USER SETTINGS
2.5 Setting Your Energy Saving Programs
cont.
• Make sure you select either HEAT or COOL by pressing the system button as appropriate. You should not
enter a program in the OFF position.
• If Auto Changeover was enabled during installation the user must select either the HEAT or COOL mode.
The thermostat cannot be programmed in the AUTO mode.
NOTE:
Once the thermostat has been programmed the user can return to the AUTO mode if desired.
• Independent program times and programmable fan settings for heating and cooling are not available if
Auto Changeover is enabled.
• When you place the system in the HEAT or COOL modes of operation, the appropriate indicator will appear in
the LCD display when the system is running.
• When you place the system in the OFF mode the display will indicate OFF.
NOTE:
If the PROG button is pressed while AUTO is selected,
the thermostat will switch from the AUTO mode to the mode
currently in the display.
NOTE:
If Auto Changeover is enabled in the Installer Options, and
a setting is made in either heating or cooling which violates the
dead band, the opposite mode will adjust up or down automatically
to maintain the dead band spacing, see section 3.2.
cont.
SYSTEM
MO
AUTO
MORN
AM
HEAT
SYSTEM
MOTUWE THFR SA SU
MORN
AM
HEAT
SET
9
FAN
AUTO
FAN
AUTO
Advertisement
