The Advanced Menu - General Dynamics Itronix GD6000 User Manual

GD6000 User Guide

The Advanced Menu

Field
Stealth Mode Configuration
I/O Device Configuration
Graphic Memory Configuration
Legacy OS Boot
Legacy USB Support
WLAN Support
Bluetooth Support
GPS Support
WWAN Support
WWAN Radio Wakeup
Boot on AC Power Detect
HDD Heater
HDD Thermal Protection
General Dynamics Itronix | 72-0136-005
Setting Function
sub-menu This menu controls stealth mode configuration.
sub-menu This menu controls I/O device configuration.
sub-menu This menu controls graphic memory configuration.
e
If enabled, attempts legacy OS boot first. If disabled, attempts EFI boot
naBled
first and legacy OS boot second.
Disabled
e
If enabled, provides legacy USB support.
naBled
Disabled
e If enabled, the WLAN device is powered on when the system reboots.
naBled
Disabled
e
If enabled, the bluetooth device is powered on when the system
naBled
reboots.
Disabled
e If enabled, the GPS device is powered on when the system reboots.
naBled
Disabled
e
If enabled, the WWAN device powers on when the system reboots.
naBled
Disabled
Enabled If enabled, power to the radio will turn on before the system entering
d
standby (S3).
isaBled
Enabled If enabled, the system will boot up or resume automatically when AC
d
power is applied and detected.
isaBled
e
If enabled, the HDD heater will power on when the temperature is too
naBled
low.
Disabled
Enabled If enabled, the system can not boot up when the hard disk drive (HDD)
d
temperature is 0°C or below, regardless HDD Heater installation. If
isaBled
disabled, the field setting can be changed by the user. The system will
boot when the hard disk drive temperature is between -20°C and 0°C.
Caution
The HDD may be damaged without the HDD Heater.
Customizing Your BIOS Settings