How Long Will The Battery Last; How Do I Change The Display Brightness; How Do I Clean The Display; How Do I Calibrate The Touch Screen - General Dynamics Itronix GD6000 User Manual

GD6000 User Guide

How long will the battery last?

The main Li-Ion battery lasts approximately 2.5 to 3.5 hours
with normal use, depending on your configuration.

How do I change the display brightness?

Fn+F6
Press to decrease display brightness
„ „
Fn+F7
Press to increase display brightness
„ „

How do I clean the display?

To clean the display assembly, use a soft, dry cloth. In some
cases, you can use a small amount of water to remove streaks
or smears. Do not use paper products because they can
scratch the screen.

How do I calibrate the touch screen?

1.
Start, All Programs, Touchkit, Configure Utility
Select
2.
4 pts Cal
Select
3.
Touch the tip of the pen to the center of each blinking symbol as
they appear on the screen until calibration is complete.
4.
Select OK to save and exit.
General Dynamics Itronix | 72-0136-005
.
Troubleshooting