Graphic Memory Configuration; The Security Menu - General Dynamics Itronix GD6000 User Manual

GD6000 User Guide

Graphic Memory Configuration

Field
DVMT Pre-Allocated
Total Graphics Memory

The Security Menu

You can set, change or remove passwords in the Security menu.
note
This is the Security screen as seen when both Supervisor and User passwords are installed.
Field
Supervisor Password Is
User Password Is
HDD Password Is
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
General Dynamics Itronix | 72-0136-005
Setting
32 MB
64 mB
128 MB
128 MB
256 mB
MaxDVMT
Setting Function
Clear Shows if a password has been set.
Clear Shows if a password has been set.
Clear Shows if a password has been set.
Enter New Password Supervisor Password controls access to the Setup Utility
Enter New Password User Password controls access to the system
Enter New Password HDD Password controls access to the removable hard disk drive.
Enabled If enabled, system will ask for password on post time. If dis-
d
abled, system will ask for password when entering setup utility.
isaBled
Customizing Your BIOS Settings
Function
Select the DVMT pre-allocated graphics memory
size to be used by the internal graphics device.
Select the amount of total graphics memory to be
used by the internal graphics device.