The Advanced Menu - General Dynamics Itronix GD2000 User Manual

GD2000 User Guide

The Advanced Menu

The Advanced Menu provides the user with the ability to
configrure specific system settings.
Field
Stealth Mode Configuration
Keyboard Features
Graphics Memory Sub-Menu
USB Control Sub-Menu
Super IO Configuration
2nd Super IO Configuration
Battery Calibration Sub-Menu
SATA Mode
Intel Execution-Disable Bit
System Cooling Mode
Resume on Modem Ring
WLAN Support
Bluetooth Support
®
General Dynamics Itronix 72-0139-001
Setting Function
Sub-Menu Depending on Stealth Mode setting, LED, FAN Beeps, LCD Bright-
ness, Audio and Wireless devices will keep silent when activated.
This allows the computer to be used in an environment where
sound and light could be dangerous or disruptive.
Sub-Menu Selects keyboard options such as NumLock power on state, Light
Sensor, Backlight, and left button.
Sub-Menu Select the amount of total graphics memory
Sub-Menu Enable/Disable all external USB ports
Sub-Menu Configure I/O Devices (serial ports) on the vehicle dock, office
dock and the GPS radio
Sub-Menu Configure I/O Devices (serial ports) on the Expansion Module
(Only displayed if Expansion Module is installed)
Sub-Menu Configure Virtualization and system resumption
Controls the mode in which the SATA controller should operate.
IDE
ahCi
e When disabled, forces the Execute-Disable Bit Capability
nabled
extended feature bit to always return to 0.
Disabled
Cool Set cooling mode.
n
Cool: CPU is slowed down to reduce heating
ormal
Max Performance Normal: CPU runs normally
Max Performance: CPU runs as fast as necessary
note
However, over-heating will limit performance and the fan will run.
o The system wakes from sleep when an incoming call is detected if
FF
the setting is On.
On
e
The WLAN device is powered on when the system boots if the
nabled
WLAN support is enabled. It is not powered on when the system
Disabled
boots if the WLAN support option is disabled.
e
The Bluetooth
nabled
Disabled
the Bluetooth
system boots if the Bluetooth
Customizing the BIOS
Max Performance will not allow the unit to over-heat.
device is powered on when the system boots if
®
support is enabled. It is not powered on when the
®
support option is disabled.
®