Adjusting Suspension - BMW R 1200 GS Rider's Manual

4
70
In the multifunction display the
damping is shown in area 1, the
spring preload in area 2.
z
The setting shows briefly, then
disappears automatically.

Adjusting suspension

Switch on the ignition.
Press button 1 briefly to view
the current setting.
To adjust damping:
Repeatedly press button 1 until
the setting you want to use
appears on the display.
You can adjust the damping
characteristic while the mo-
torcycle is on the move.
The following settings are avail-
able:
SOFT
: Comfortable damping
characteristic
NORMAL
: Normal damping
characteristic
HARD
: Sporty damping char-
acteristic
OE
with riding modes
In the modes ENDURO and EN-
DURO PRO only two settings are
possible:
SOFT
: Comfortable damping
characteristic
HARD
: Sporty damping char-
acteristic
To adjust spring preload:
Start the engine:
You cannot adjust spring
preload while the motor-
cycle is on the move.
Repeatedly press button 1 and
hold until the setting you want
to use appears on the display.
The following settings are avail-
able:
One-up