BMW R 1200 GS Rider's Manual page 57

Press button 1 to switch on
the daytime riding lights.
The indicator light for the
daytime riding light illumin-
ates.
The low-beam headlight, the
front side lights and the auxili-
ary headlight are switched off.
In the dark or in tunnels: Press
button 1 again to switch off the
daytime riding lights and switch
on the low-beam headlight.
The auxiliary headlight is also
switched on again.
If the high beam headlight
is switched on whilst
the daytime riding light is
switched on, the daytime riding
light will be switched off after
approx. 2 seconds, and the
high beam headlight, low beam
headlight, front side lights and, if
applicable, the auxiliary headlights
will be switched on.
If the high beam headlight is
switched off again, the daytime
riding light is not automatically
reactivated, but must be
switched on again if required.
Automatic daytime riding
light
with daytime riding lights
The changeover between
daytime riding light and
low beam headlight incl. front
side lights can be effected
automatically.
The automatic riding light
control system cannot re-
place your personal assessment
of lighting conditions. The light
sensor measurement may be
falsified by e. g. fog or misty
weather.
In such situations the low beam
headlight must be switched on
manually, as otherwise as safety
risk would occur.
SETUP
In the
display, at the menu item
DLIGHT
set the automatic
daytime riding light to
The indicator light for the
automatic daytime riding
light illuminates.
OE
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B. in
a tunnel). If a sufficient ambi-
ent brightness is detected, the
daytime riding light is switched
4
55
menu of the
z
ON
.