BMW R 1200 GS Rider's Manual page 53

Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the year in the bottom display
line 3 starts to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the year no longer flashes.
Setting is complete.
In order to cancel the setting
at any point, keep button 1
pressed until the initial value
is shown again.
If you drive off before
the setting has been
completed, the setting will be
cancelled.
Individualising display
with on-board computer Pro
In the individualisation menu it is
possible to set which information
is to be displayed in which dis-
play line.
SETUP
In the
the menu item
BASIC
.
Briefly press button 1 to start
the individualisation menu.
SETUP BC CUSTOM
pears on the display.
Briefly press button 1 again to
exit the individualisation menu.
OE
setting will be active again. The
individualisation
mains stored.
menu, select
SETUP BC
Press button 1 for a long
period in order to display the
first menu item.
SETUP BC ODO
the display.
ap-
SETUP BC BASIC
If
selected, then the factory
CUSTOM
re-
appears on
is
4
51
z