BMW R 1200 GS Rider's Manual page 135

Replace the defective bulb.
Bulb for parking light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Insert bulb 1 into the bulb
socket.
Install bulb carrier 1 in the
headlight housing.
Place cover in position and fit
by turning in a clockwise direc-
tion.
Replacing LED for brake
light and tail light
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replace LED flashing turn
indicators
with LED turn indicators
The LED flashing turn indic-
ators can be replaced only as
a complete unit. Consult a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Remove turn indicator
bulbs, front and rear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
8
OE
133
z