Table of Contents
Advertisement
with Connectivity
4
Possible ASC system status ON
is displayed.
110
Release button 1 once the
status has changed.
ASC/DTC indicator and
warning light remains off
or continues to flash.
with Connectivity
The new ASC/DTC system
status ON is displayed briefly.
z
The ABS system status remains
unchanged.
The ASC/DTC function is
switched on.
If the coding plug is not inser-
ted, you have the alternative of
switching the ignition off and
then on again.
OE
remains on even though the
vehicle has accelerated past
the minimum speed stated
below after the ignition was
switched off and then on
again, an ASC/DTC fault has
occurred.
OE
min 5 km/h
See the section entitled "En-
gineering details" for more in-
formation on traction control
ASC/DTC.
How does traction control
work? (
Electronic Suspension
Adjustment (DESA)
with Dynamic ESA
https://www.motorcycle-manual.com/
If the ASC/DTC indicator
and warning light
187)
OE
Possible settings
Dynamic ESA (electronic chassis
and suspension adjustment) en-
ables you to adjust rear-wheel
damping to the road surface.
Three damper settings and three
spring preload levels are avail-
able.
Viewing suspension
settings
Switch on the ignition (
Press button 1 briefly to view
the current setting.
86).
Advertisement
Table of Contents
