BMW R 1200 GS Rider's Manual page 77

Installing rear seat
Place the rear seat centrally
into the rear mountings 1 and
into the front mounting 2.
In order to position the rear
seat closer to the rider's seat,
press rear seat evenly for-
wards and downwards over
the mountings until the locking
mechanism engages.
In order to position the rear
seat further away from the
rider's seat, press rear seat
evenly backwards and down-
wards over the mountings un-
til the locking mechanism en-
gages.
Removing front seat
Removing rear seat (
Use vehicle key to turn seat
lock 1 to the left and hold, sup-
portingly press down the rider's
seat in the rear area 2.
Lift the front seat at the rear
and release the key.
Remove the front seat and
place it, upholstered side down,
on a clean surface.
Installing front seat
Removing rear seat (
Adjusting seat height and seat
tilt ( 75).
74).
Set rider's seat into the mount-
ings 1 left and right, and place
loosely on the motorcycle.
Press the rider's seat slightly
forward in its rear area and
then firmly down until the lock-
ing mechanism engages.
Adjusting seat height and
seat tilt
Remove front seat (
4
74).
75
z
75).