BMW R 1200 GS Rider's Manual page 74

If an alarm was triggered while
4
the motorcycle was unattended,
the rider is notified accordingly
72
by an alarm tone sounding once
when the ignition is switched on.
The anti-theft alarm telltale light
then signals the reason for the
alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
z
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Disconnect of the
anti-theft alarm from the mo-
torcycle's battery
Flashes 5x: Motion sensor 3
Deactivation
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customising anti-theft
alarm settings
Switch on the ignition, or bring
the motorcycle to a stop.
Repeatedly press button 1
briefly until the top display line
SETUP ENTER
displays 2
Press and hold button 1 to
SETUP
start the menu.
Respectively press button 1
briefly to go to the next menu
DWA
item .
In the top display line 2
indicated.
The bottom display line 3
shows the preset value.
Press button 4 briefly in order
to change the set value.
The following settings are avail-
able:
.
On
: The alarm system has
been activated or will be ac-
tivated automatically when the
ignition is switched.
DWA
is