Download Print this page
Samson S-Combine Owner's Manual
Samson S-Combine Owner's Manual

Samson S-Combine Owner's Manual

Two by one microphone combiner

Advertisement

Quick Links

Two by One Microphone Combiner

Advertisement

loading

Summary of Contents for Samson S-Combine

  • Page 1 Two by One Microphone Combiner...
  • Page 2: Table Of Contents

    Front and Rear Panel Layout Operating the S combine Setting up the S combine Typical Set-up Wiring Guide Specifications Copyright 2003, Samson Technologies Corp. Printed June 2003 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www.samsontech.com...
  • Page 3: Introduction And Features

    S combine Introduction and Features Introduction Congratulations on your purchase of the S combine by Samson Audio! The S combine is a two-to-one microphone combiner ideal for any situation where an extra microphone input is needed. The S combine is a perfect solution for live sound applications, as well as, fixed installations like schools, hotel meeting rooms and houses of worship.
  • Page 4: Front And Rear Panel Layout

    S combine Front and Rear Panel Layout Front Panel Layout DIRECT INPUT- XLR balanced ISOLATED INPUT- XLR balanced, trans- microphone input for connecting former isolated microphone input for the second microphone. connecting the first microphone. ISOLATED GROUND LIFT- When engaged, the ground from the Isolated Mic Input is disconnected.
  • Page 5: Operating The S Combine

    Operating the S combine Setting Up the S combine The basic procedure for setting up and using your S combine is simple and takes only a few minutes. Remove all packing materials (save them in case of need for future service). There are many different ways to use the S combine, however the basic connection is the same in most installations and applications.
  • Page 6: Typical Set-Up

    Operating the S combine Typical Set-up The diagram below shows a typical set-up for a project recording studio using the S com- bine to mix two microphones into one microphone input. Typical hook-up for connecting two mics to one channel of a mixer. SIGNAL FLOW SIGNAL FLOW Mic Out.
  • Page 7: Wiring Guide

    S combine Wiring Guide Wiring Guide There are several ways to interface the S combine, depending on your exact set-up. Follow the cable diagrams below for connecting your gear.
  • Page 8: Specifications

    <-90 dBu Dimensions 5.65” L x 4.13” W x 2” H (144mm L x 105mm W x 51mm H) Weight 16.5 oz., 419 gm. Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888...