Download Print this page
Samson STAGE 412 Owner's Manual

Samson STAGE 412 Owner's Manual

Frequency-agile, quad-channel wireless system

Advertisement

Quick Links

OWNER'S MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the STAGE 412 and is the answer not in the manual?

Questions and answers

Summary of Contents for Samson STAGE 412

  • Page 1 OWNER'S MANUAL...
  • Page 2 Copyright 2018, Samson Technologies Corp. Samson Technologies Corp. 278-B Duffy Ave Hicksville, NY 11801 www.samsontech.com...
  • Page 3: Important Safety Information

    For Countries not mentioned above, please contact your local authorities for a correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. Stage 412: Quad Handheld Wireless System...
  • Page 4 Important Safety Information FCC Rules and Regulations Samson wireless receivers are certified under FCC Rules part 15 and transmitters are certified under FCC Rules part 74. Licensing of Samson equipment is the user’s responsibility and licensability depends on the user’s classification, application and frequency selected.
  • Page 5 19. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 20. The AC plug considered as disconnect device of adapter. Stage 412: Quad Handheld Wireless System...
  • Page 6 Featuring simple operation, with 12 available channels and infrared set for the transmitter channel, the Stage 412 can quickly be up and running out of the box. The system includes the SR412 Quad channel receiver with individual and mixed outputs.
  • Page 7 RF signal present and detected by the receiver. Channel Labels - The channel label designates the frequency group. The label color matches the label color on the bottom of the corresponding handheld microphone transmitter. Stage 412: Quad Handheld Wireless System...
  • Page 8 SR412 Receiver Rear Panel Features Antenna - The antenna mountings allow full rotation for optimum placement. In normal operation, both antennas should be placed in a vertical position. The antennas can be folded down for convenience when transporting the SR412. POWER DC IN - Connect the supplied 15-volt adapter here.
  • Page 9 IR Lens facing towards the receiver to load the selected channel. Plastic Screwdriver - Designed for use in adjusting the VH12 input GAIN control (See #5 Input GAIN Control). Stage 412: Quad Handheld Wireless System...
  • Page 10: Quick Start

    In order for your wireless system to work correctly, both the receiver and transmitters must be set to the same channel. Follow this basic procedure for setting up and using your Stage 412 wireless system: Physically place the SR412 receiver where it will be used, and fully extend the antennas vertically.
  • Page 11 Press the CH A SELECT button on the front of the SR412 to choose an available channel for the CH A receiver. The channel number will increase by one digit, from 1–6. Once the last channel has been reached, the count will cycle back to 1. Stage 412: Quad Handheld Wireless System...
  • Page 12 Quick Start Position the VH12 transmitter about 6-12" (15-30 cm) from the front of the SR412 receiver with the transmitter's IR window facing the IR transmitter on the front panel of the SR412 receiver. Press and hold the SR412 CH A SELECT button to set the transmitter to the same channel as the receiver via infrared transmission.
  • Page 13: Specifications

    ø2.16” x 10” / ø55 mm x 255 mm Net Weight 0.48 lb / 0.22 kg At Samson, we are continually improving our products, therefore specifications and images are subject to change without notice. Stage 412: Quad Handheld Wireless System...
  • Page 14 A third kind is called tone squelch (sometimes called “tone-key” or “tone-code” squelching). The Stage 412 system features this method of squelch. Here, the transmitters add a supersonic tone to all audio signals they transmit, with the receivers refusing to pass through any received...
  • Page 15: Troubleshooting

    Audio Dropout Remove any sources that may cause RF interference, such as cell phones, cordless phones, lighting equipment, computers, etc. Transmitters and Contact your Samson reseller or distributor for assistance. Receiver on Different Channels Stage 412: Quad Handheld Wireless System...
  • Page 16 Samson Technologies 278-B Duffy Ave Hicksville, NY 11801 Phone: 1-800-3-SAMSON www.samsontech.com...