Style; Nta - Roland BK-7m Owner's Manual

Backing Module BK-7m
Menu options
Parameter Setting
Tx Off, On
Tx Channel 1~16
Performance Off, On
PC Tx

Style

The following parameters are located on the display
page that can be selected using [MENU] button‰
"MIDI" ‰ "Edit System" ‰ "Style".
The Style channel is used for receiving program
change and bank select messages that select Styles
and volume messages that change the Style's vol-
ume.
The MIDI address of a Music Style consists of three
elements: a CC00 number, a CC32 number and a pro-
gram change number. The values assigned to CC00
and CC32 define the Style (see "Music Style list" on
p. 88), whereas the program change number defines
the Division (Intro, Ending, etc.). See "Style division
program change numbers" on p. 90.
Sending only a program change number selects
another Division of the currently active Style. Be
aware, however, that only sending CC00 and CC32
messages (without a program change) has no effect.
NOTE
When you select another Style on your BK-7m, it transmits
a CC00-CC32-PC cluster on the Style channel, which you
could record using an external sequencer.
Parameter Setting
Rx Off, On
Rx Channel 1~16
70
Explanation
Switches the transmis-
sion of MIDI messages
on the Basic channel
on or off.
The channel used to
transmit MIDI mes-
sages.
This parameter is used
to enable or disable the
transmission of pro-
gram change and bank
select messages related
to Performance selec-
tion
Explanation
Switches the recep-
tion of MIDI messages
on the Style channel
on or off.
Use this parameter to
assign a MIDI receive
channel to the Style
section.
Parameter Setting
Style Volume Off, On
Rx
Style Pc Rx Off, On
Tx Off, On
Tx Channel 1~16

NTA

The following parameters are located on the display
page that can be selected using [MENU] button‰
"MIDI" ‰ "Edit System" ‰ "NTA".
These parameters allow you to specify on which MIDI
channels the BK-7m should receive chord informa-
tion used to change the Music Style's key in real-time
(the notes in question are called "Note-to-Arranger",
or "NTA" for short).
Parameter Setting
Channel Ch1~Ch16
Rx Off, On
Rx Octave –4~0~ 4
Explanation
Allows you to enable
or disable the recep-
tion of volume mes-
sages relating the
Style.
This parameter allows
you to enable or dis-
able the reception of
program change and
bank select messages
for Style selection.
Switches the transmis-
sion of MIDI messages
on the Style channel
on or off.
The channel used to
transmit MIDI mes-
sages.
Explanation
MIDI channel
This parameters allows
you to specify whether
("On") or not ("Off") the
selected MIDI channel
should be used to
receive chord informa-
tion.
Use this parameter to
transpose the notes
received on the
selected MIDI channel
("Ch") in steps of one
octave.