Table of Contents
Advertisement
Clock/Calendar
Your system can display the current time (see your installer). The date is not displayed,
but has an internal function. The system must be disarmed with no faults present.
To set the time and date:
NOTES:
1. The keypad beeps twice for invalid data entries (e.g., an hour greater than 12), and the
entry will not be accepted. The keypad beeps once for valid entries.
2. Clock-Setting mode automatically ends if no keys are pressed for one minute.
3. Daylight savings time may have been programmed to automatically begin and end.
Hour % (The current hour will be displayed with the AM/PM indication.)
Enter the 2-digit hour (i.e., 01-12).
Press [*] to accept the entry and continue to the AM/PM selection.
Press [#] to exit Clock-Setting mode (keypad beeps 4 times).
AM/PM 4 (The current AM/PM setting will display A or P.)
Enter 1 for PM or 0 for AM.
Press [*] to accept the entry and continue to the minute selection.
Press [#] to return to hour-setting prompt.
Minute
Enter the 2-digit minute (i.e., 00-59).
Press [*] to accept the entry and continue to the month selection.
Press [#] to return to AM/PM setting.
Month
Enter the 2-digit month designation (i.e., 01-12).
Press [*] to accept the entry and continue to the day selection.
Press [#] to return to the minute setting.
Day
Enter the 2-digit day of the month (i.e., 01-31).
Press [*] to accept the entry and continue to the year setting.
Press [#] to return to the month setting.
Year
Enter the last two digits of the year (i.e., 00-99).
Press [*] to accept the entry and exit Clock-Setting mode (keypad beeps 4 times).
Press [#] to return to the day setting.
Master Code or Installer Code
(The current minute will display.)
(The current month will display.)
(The current day of the month will display.)
(The current year will display.)
+ FUNCTION + [63]
– 22 –
Advertisement
Table of Contents
