Clock/Calendar - First Alert ReadyGuard Touch User Manual

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS

Clock/Calendar

Note: If your system is equipped with a GSMVLP5 or ILP5 Communication Module, the time and date will
be programmed and updated automatically via Central Station. You may still program the correct
Time Zone as shown below. Check with your installer to see if your system is equipped with a
Communications Module.
Setting the Date and Time
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Program the system
Enter Code:
Cancel
Ready To Arm
Users
Events
Date Time Reminders
Tools
Dashboard Settings
Back
5100-100-003-V0
1 2 3
4 6
5
7 9
8
Clear 0
5000-100-009-V0
Test Keypad
Slide Show WiFi Config
Back
5100-100-006-V0
– 44 –
Note: The system must be disarmed in order
to set the date and time.
1. With the system in the disarmed state,
select the "Tools" icon from the second page
of the Home Screen. The system displays
the Keypad screen.
2. Enter your 4-digit Master User Code. The
system displays
programming screen.
3. Select the "Date Time" icon. The Calendar
screen will appear.
the Master User