ACN IRIS 3000 User Manual page 26

Digital phone service
Hide thumbs Also See for IRIS 3000:
Table of Contents

Advertisement

Press the "OK" button
Wallpaper and press the "Back"
NOTE: A "No USB/SD device!" warning will appear if a USB or SD device is not inserted.
Digital Photo Frame
Select "On" to
enable the Digital Photo Frame
NOTE: If you are displaying large photo files (greater than 3 mega pixels or larger than 600 x 800), set the delay in between each
picture to 20 seconds. This will allow enough time for each photo to load.
Upload Bandwidth
Upload Bandwidth is the capacity at which your Videophone can upload data over your Internet connection. Your Videophone is pre-set
with optimal factory settings. If the video you are sending is not as clear as you would like, you can adjust the upload bandwidth speed
of your Videophone.
Before adjusting your upload bandwidth you should perform a test to determine your actual upload bandwidth speed. From your
computer connected to your LAN, go to
Go to "Upload Bandwidth" in the
Display menu
If your Upload bandwidth speed is between less than 256, please contact your ISP about higher speed service.
If your Upload bandwidth speed is between 257 and 383, you should select an Upload bandwidth speed of 128.
If your Upload bandwidth speed is between 384 and 531, you should select an Upload bandwidth speed of 256.
If your Upload bandwidth speed is between 532 and 698, you should select an Upload bandwidth speed of 384.
If your Upload bandwidth speed is greater than 699, you should select an Upload bandwidth speed of 512.
26
Select the image to use as your
button
to save
Digital Photo Frame Delay
Select the time delay you
would like to use between images
(10, 15 or 20 seconds)
www.comparebroadband.com.au/speedtest.htm
1. Click on 'Begin Test'. This process will take approximately 60 seconds
2. Write down the Download and Upload speed for your Videophone
Select the Upload Bandwidth
speed for your Videophone
(128, 256, 384 or 512)
Select "YES" to confirm the change of Wallpaper
Language
To change the language displayed on the LCD
screen simply select an alternative language
Press the "Back" button
"YES" to save your settings
and select

Advertisement

Table of Contents
loading

Related Products for ACN IRIS 3000

Table of Contents