How To Change The Direction Of The Drain Hose - Haier 50FREE-1 User Manual

Steps of using the operation buttons and
b
description of the steps
Soak Wash
Sterilize Rinse
20
Thrice
15
Twice
Once
1.Push "power" button to switch on the power
2.Push "program" button to select suitable
full-auto program
After the power is switched on, "standard" is automatically set. To select other full-auto program, please push
the "program" button till the corresponding indicator is on. Refer to the "Program button" on Page 11.
E.g. Set to "Superfast" program for small quantity of laundries with light soil.
In selecting the standard program, the machine will execute fuzzy program to select water
and wash time according to the cloth and weight of the laundries. The full procedure is controlled
automatically.
3 Push "soak", "wash", "rinse/sterilize", "spin" button to select suitable
procedure program
Attention
Even there's no water in the tub, a certain period is required before spin starting.
Separate the laundries that are not colorfast from other laundries in washing.
The pulsator will not rotate unless the water is filled to selected water level.
12
Spin
42L 45L
carpeting Standard Air dry
36L 39L Fibre
Save
Wool Superfast
29L 32L
22L 26L
14L 18L
Reserve
Lock
6

How to change the direction of the drain hose

1.Dismantle the back cover.
2.Put down the drain hose.Take off the drain
hose rack.Pull the drain hose into the cabinet
from the left side of the bottom.
Using the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position (Do not
put it on ground.)
Notes: The highest point of drain pipe shuold be
higher than the water level of washing tub for
avoiding to siphon phenomenon during drain.
0.8m<H<1.2m
3.Protrude the drain hose from the hole on the right side
of the bottom,and fasten it onto the bottom with rack
and screw.
4.Install the back cover.
2.Do not step on or press the drain hose.
5