Installing The Printer Driver By Searching For The Printer Using The Add Printer Wizard - Oce VarioLink 2222c User Manual

Explore your options
Hide thumbs Also See for VarioLink 2222c:
Table of Contents

Advertisement

4
Installing the printer driver by searching for the printer using the Add Printer
Wizard
0
Installing the driver to Windows Vista/Server 2008-based computers requires the administrator author-
ity.
0
Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the printer driver DVD-ROM for Windows into the DVD-ROM drive of the computer.
2
Click [Start], and then select [Control Panel].
3
Click [Printers] under [Hardware and Sound].
The [Printers] window appears.
% When [Control Panel] is displayed in Classic View, double-click [Printers].
4
Click [Add a printer] on the toolbar.
The [Add Printer] window appears.
5
Click [Add a network, wireless or Bluetooth printer].
Connected printers are detected.
% If no printer is detected, turn this machine off, then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn this machine on immediately after turning it off, it may not function correctly.
6
Select your machine from the list, and then click [Next].
% To use the LPR/Port9100 protocol, select the printer with its IP address.
% To use the SMB connection, select the printer with its "\\NetBIOS name\print service name".
% For the SMB connection, click [Next], and then click [OK] in the [Connect to Printer] page that ap-
pears.
% It may take some time to finish searching the entire list of printers.
7
Click [Have Disk...].
8
Click [Browse...].
9
Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Selecta-
ble printer drivers:
PCL driver, PS driver, XPS driver and fax driver
10
Click [OK].
The [Printers] list appears.
11
Click [Next].
% To use the SMB connection, click [OK].
12
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue].
% If the [Windows Security] window for verifying the publisher appears, click [Install this driver soft-
ware anyway].
13
Click [Finish].
14
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
15
Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.
4-4
Windows Vista/Server 2008
VL3622c/VL2822c/VL2222c
4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Variolink 2822cVariolink 3622c

Table of Contents