11
11.11
Banner printing function
On this machine, paper size up to 47-1/4 inches (1200 mm) in length can be loaded into the bypass tray for
printing, by configuring on the control panel.
In the following sections, loading long paper and printing on it are referred to as banner printing.
11.11.1 Paper
Applicable paper
Paper width
8-1/4 to 11-11/16 inches
(210 to 297 mm)
11.11.2 Printer drivers and supported operating systems
The following drivers support banner printing.
-
PCL Driver for Windows (PCL driver)
-
PostScript Driver for Windows (PS driver)
-
XPS Printer Driver for Windows (XPS driver)
11.11.3 Configuring the printer driver
Specify the output paper size as a custom paper size.
1
Click the [Basic] tab.
% With the PCL Driver, custom size setting can also be registered in advance on the [Settings] tab of
the printer driver accessed from the Windows' [Printers] ([Printers and Faxes] for Windows XP/Serv-
er 2003) window.
2
Select [Custom Size] from [Original Size] or [Paper Size].
The [Custom Size Settings] dialog box appears.
3
Select the width and the length of the custom size according to the unit you use and then click [OK].
The [Confirm setting changes] dialog box appears.
4
Click [Yes].
5
If necessary, configure [Paper Settings for Each Tray...], [Bypass Tray], [Paper Type], and other settings.
6
Click [OK].
11-42
Paper length
18 to 47-1/4 inches (457.3 to
1200 mm)
Banner printing function
Paper weight
33-13/16 to 55-7/8 lb (127 g/m
2
210 g/m
)
(Using the printer driver, select the paper
type appropriate for the weight of the
banner paper to be used.
33-13/16 lb to 41-3/4 lb (127 g/m
2)
157 g/m
: Thick 1, Thick 1 (Side 2)
2
42 lb to 55-5/8 lb (158 g/m
Thick 2, Thick 2 (Side 2)
2
55-7/8 lb (210 g/m
): Thick 3, Thick 3
(Side 2))
VL3622c/VL2822c/VL2222c
11.11
2
to
2
to
2
to 209 g/m
):