Installing The Printer Driver By Creating A Printer Port - Oce VarioLink 2222c User Manual

4.1 Windows Vista/Server 2008

Installing the printer driver by creating a printer port

0 Installing the driver to Windows Vista/Server 2008-based computers requires the administrator author-
ity.
0 Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the printer driver DVD-ROM for Windows into the DVD-ROM drive of the computer.
2
Click [Start], and then select [Control Panel].
3
Click [Printers] under [Hardware and Sound].
The [Printers] window appears.
% When [Control Panel] is displayed in Classic View, double-click [Printers].
4
Click [Add a printer] on the toolbar.
The [Add Printer] window appears.
5
Click [Add a local printer].
The page for [Choose a printer port] appears.
6
Click [Create a new port:], and then select the port type.
% To use the LPR/Port9100 protocol, select [Standard TCP/IP Port].
% To use the SMB connection, select [Local Port].
7
Click [Next].
8
Specify the IP address and port.
% To use the LPR/Port9100 protocol, select [TCP/IP Device], and then enter the IP address.
% To use the SMB connection, enter "\\NetBIOS name\print service name" in the [Port Name] box.
% Enter the same NetBIOS name and print service name specified in [Print Settings] in [SMB Settings].
9
Click [Next].
% If the [Additional Port Information Required] dialog box appears, go to Step 10.
% If the [Install the printer driver] dialog box appears, go to Step 13.
10
Select [Custom], and then click [Settings...].
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
% If both LPR and Port9100 are enabled on this machine, the printer driver is connected to this ma-
chine using LPR.
12
Click [Next].
The [Install the printer driver] page appears.
13
Click [Have Disk...].
14
Click [Browse...].
15
Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Selecta-
ble printer drivers:
PCL driver, PS driver, XPS driver and fax driver
16
Click [OK].
The [Printers] list appears.
VL3622c/VL2822c/VL2222c
4
4-5