Other Configurations; Receiving Calls; Dialing Call Numbers; Call - Siemens euroset 3020 User Manual

( )
* in case of having contracted the Mailbox service
of your local operator

Other configurations

There are other configurations that can be
accessed by using the PREFERENCES
option, as is shown by the following:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the PREFERENCES option by
using the DIAL/SELECT key
Enter one of the codes below, in
according with the desired option:
• 11 flash time 250 ms
• 12 flash time 375 ms
• 13 flash time 600 ms
• 14 flash time 100 ms
• 21 pause time 2 s
• 22 pause time 3 s
• 23 pause time 3,6 s
• 24 pause time 1 s
:
• 31 enables checking repeated
calls
• 32 disables checking repeated
calls
• 51 erase the list of outgoing calls
• 52 erase the list of received calls
• 99 returns to default
configuration
Press the MENU key

Receiving calls

When receiving a call, the telephone will
give a resonant warning in accordance with
the melody and the volume selected. To
answer the call, lift the handset. In case of
having contracted the Service of Call
Identification of your local operator, the
display will show information about the
number that originated the call (see the
item about Call Identification on page 10).
Note:
To receive call identification information, do
not answer the telephone before the
second ring.

Dialing call numbers

Using the numeric keypad to make a call
Lift the handset, wait for the dial tone and
dial the desired telephone number through
the numeric keypad. During the dialing, the
digits of the number will be shown on the
display (position 28 on page 3) and the call
will be carried out. To dial with the handset
on hook, dial the desired number, lift the
handset and press the DIAL/SELECT key
.
As well as the dialed number, the display
will show the current time, date and the
duration of the call in minutes, from the
moment that the handset is lifted (positions
22, 24 e 25, respectively, on page 3).

Using the memories to make a call

With the handset on hook:
Press the MEM key
Press the desired memory number
:
( to , and )
Lift the handset
Press the DIAL/SELECT key
With the handset off hook:
With the handset off hook
Press the MEM key
8