Receiving A Call; Indication Of Received Calls; Consultation Of Received Calls; Erasing The Received Calls - Siemens euroset 3020 User Manual

Receiving a call

On receiving a call, the display will show
the number and the name of the caller. In
the case of Long Distance Calls the
received number will be showed with the
area code. Now for calls with the same
area code that are programmed in the
telephone, the caller's number will be
shown on the display without the area
code.
If the caller number is not sent, it will not be
shown on the display and will not be stored
in the list of received calls.
On answering the call, the number, the
name and current time/date will be shown.
The time and the date will be stored for
future consultation.
The information received will be shown
during the conversation, disappearing when
the handset is replaced on hook.

Indication of received calls

With the handset on hook, the display will
show the following information: number of
received calls, number of new calls, current
time and date.

Consultation of received calls

To consult the received calls, press one of
the ARROW keys or , with the handset
on or off hook. During the consultation, the
display will show the information described
below, in accordance with the figure of the
display:
1 2 3 4
6
1) Order number of call on the list, where 1
is the most recent call
2) Time of the call beginning
3) Date of the call beginning
4) Duration of call in minutes (00' if it was
not answered and 99' if it exceeds the
two digit counter)
5) Caller number
6) Caller name
If the list of received calls is empty, on
making the consultation the display will
show the message "NO CALL".
In the list of new calls (unanswered calls
still not reviewed), you can enable or
disable the telephone to check repeated
calls (see the item Other configurations
on page 8). When the repeated call
indicator REP is enabled and there are
repeated calls without verification (they are
listed as NEW), the telephone will store
only the last call of each repeated number.
When the check of repeated calls is
disabled, all the calls will be stored in the
list of received calls, even if it is repeated.

Erasing the received calls

To erase a call from the list of received
calls, proceed in the following way:
Select the register that will be erased
by using the ARROW key
Press the DEL/EXIT key
Press the key to confirm
To erase all the list of received calls,
proceed in accordance with the item Other
configurations on page 8, code number
52 in the PREFERENCE option.

Consultation of outgoing calls

To consult the list of outgoing calls,
proceed in the following way:
Press the MENU key
5
Select the OUTGOING CALLS option
by using the DIAL/SELECT key
11