Spool Pin - Husqvarna Viking Scandinavia 100 User Manual

Procedures
Spool Pins
The machine has spool pins suitable for all
types of thread. The main spool pin (a) is
adjustable – the thread reels off the station-
ary spool. Place the spool so that the thread
reels counter-clockwise.
a
d
b
c
There are two spool holders on the spool
pin. With narrow thread spools, the small
holder (b) is placed in front of the thread. If
you use large thread spools, the large holder
(c) is placed in front of the thread.
Narrow thread spool
Slide the correct size spool holder in place
so the fl at side is pressed fi rmly against the
spool. No space between spool holder and
spool.
Large thread spool
There is also a separate spool pin (d) to be
attached onto the machine. The fi ngers on
the extra spool pin fi t into the two holes to
the right of the fi xed spool pin. Push down-
ward to snap in place.
The large spool holder (c) is placed under
the thread. This spool pin is used when
c
winding a bobbin from a second spool of
thread or for a second spool when sewing
d
with a twin needle.
6